Using an External Flash (Optional)
Using in Wireless Mode
1.Place the SEF-36PZF at the desired location.
2.Set the SEF-36PZF power switch to [WIRELESS].
3.Set the SEF-36PZF wireless mode to S (Slave).
4.Turn the camera mode dial and set the exposure mode to , , or mode.
5.Set the SEF-36PZF power switch on the camera to [WIRELESS].
6.Set the SEF-36PZF wireless mode on the camera to (Master) or (Control).
INFORMATION
Wireless mode is not available for the built-in flash.
Set the SEF-36PZF wireless slave mode to SLAVE1.
See the SEF-36PZF operating manual for details.
Wireless Flash Control (P-TTL Flash Mode)The following information is exchanged between the two SEF-36PZF flash units before the flash is discharged when the SEF-36PZF is used for wireless flash.
Press the shutter release button fully.
1.The camera s flash discharges a pre-flash (the camera s flash mode is transmitted).
2.The external flash unit discharges a pre-flash (the subject s lighting condition is checked).
3.The camera s flash unit discharges a pre-flash (the required flash output is transmitted to the
external flash).
The camera s flash will discharge another pre-flash to transmit the flash duration in HS (High-speed sync).
4.The external flash discharges the main flash.
Set the SEF-36PZF wireless slave mode to SLAVE1.