Troubleshooting

We recommend checking the following items before contacting a service center.
ProblemCause

 

Remedy

 

 

Batteries are not

Check if batteries are installed. If not, install batteries.

 

installed

 

 

 

 

 

 

 

 

 

 

Camera does not

Batteries are not

Check orientation of batteries. Re-insert batteries
turn oninstalled properlyaccording to thesymbols. (p.23)

 

 

 

 

 

 

Battery power is low

Replace with a charged battery set or use the AC adapter

 

(D-AC10, optional). (p.26)

 

 

 

 

 

 

 

 

 

 

 

 

Flash is chargingWait until charging is finished.

 

The shutter does

 

 

 

 

 

 

No available space

Insert SD Memory Card with available space or delete

not release

on SD Memory Card

unwanted images. (p.27, 73)

 

 

 

 

 

 

 

 

 

Recording

 

Wait until recording is finished.

 

 

 

 

 

 

 

 

Autofocus cannot focus well on subjects that have low

 

 

 

contrast (the sky, white walls), dark colors, intricate

 

 

 

designs, are moving quickly or scenery shot through a

 

Subject is difficult to

window or a net-like pattern.

 

 

 

focus on

 

Lock focus on another object located at same distance

 

 

 

(press shutter release button halfway), then aim at target

 

 

 

and press shutter release button fully. Alternatively, use

 

 

 

manual focus. (p.125)

 

 

 

 

 

 

 

 

 

Position subject in focus frame in middle of viewfinder.

 

Subject is not in

If the subject is outside thefocusing area, aim the camera

 

at the subject and lock the focus (press shutter release

The Autofocusfocusing area

button halfway), then compose picture and press the

does not work

 

 

 

 

shutter release button fully.

 

 

 

 

 

 

 

 

 

 

 

Subject is too close

Move away from the subject and take a picture.

 

 

 

 

 

 

 

The focus mode is

Set the focus mode lever to

. (p.118)

 

 

set to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The focus mode is

 

 

 

 

 

set to

 

Set the focus mode to(Single mode). (p.121)

 

(Continuous mode)

 

 

 

 

 

 

 

 

 

 

 

The capture mode

Set the capture mode to setting other than

(Moving

 

isset to

(Moving

 

Object) mode. (p.45)

 

 

 

 

Object) mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

200