Using an External Flash (Optional)

Using High-Speed Flash Sync Mode

With the SEF-36PZF, you can discharge the flash to take a picture at a shutter speed faster than 1/180 second. High-speed flash sync can be used with the flash attached to the camera, or wireless.

Attaching and Using the SEF-36PZF on the Camera

1.Remove the hot shoe cover and attach the SEF-36PZF.

2.Turn the mode dial and set the exposure mode to or .

3.Turn on the SEF-36PZF.

4.Set the SEF-36PZF sync mode to HS (high-speed flash sync.).

5.Confirm that the SEF-36PZF is fully charged and then take the picture.

INFORMATION

The will light in the viewfinder when the flash is ready (fully charged).

High-speed flash sync is only available when the shutter speed is faster than 1/180 sec. High-speed flash sync is not available when the exposure mode is set to (Bulb).

See the SEF-36PZF operating manual for details.

Using in Wireless Mode

Shoot using the flash without connecting the camera and flash with a cord by using two SEF-36PZF units.The High-speed sync mode is also available in wireless mode.

INFORMATION

Be sure to set the two SEF-36PZF units to the same channel. See the SEF-36PZF operating manual for details.

155

Page 156
Image 156
Samsung ER-GX1LZBAA, ER-GX1LZBBA/FR, ER-GX1LZBBA/E1, ER-GX1LZBAB, ER-GX1LZBBA/US manual Using High-Speed Flash Sync Mode