Samsung ER-GX1LZBAB, ER-GX1LZBBA/FR, ER-GX1LZBBA/E1 manual Wireless Flash Control P-TTL Flash Mode

Using an External Flash (Optional)

Using in Wireless Mode

1.Place the SEF-36PZF at the desired location.

2.Set the SEF-36PZF power switch to [WIRELESS].

3.Set the SEF-36PZF wireless mode to S (Slave).

4.Turn the camera mode dial and set the exposure mode to , , or mode.

5.Set the SEF-36PZF power switch on the camera to [WIRELESS].

6.Set the SEF-36PZF wireless mode on the camera to (Master) or (Control).

INFORMATION

Wireless mode is not available for the built-in flash.

Set the SEF-36PZF wireless slave mode to SLAVE1.

See the SEF-36PZF operating manual for details.

Wireless Flash Control (P-TTL Flash Mode)

The following information is exchanged between the two SEF-36PZF flash units before the flash is discharged when the SEF-36PZF is used for wireless flash.

Press the shutter release button fully.

1.The camera s flash discharges a pre-flash (the camera s flash mode is transmitted).

2.The external flash unit discharges a pre-flash (the subject s lighting condition is checked).

3.The camera s flash unit discharges a pre-flash (the required flash output is transmitted to the

external flash).

The camera s flash will discharge another pre-flash to transmit the flash duration in HS (High-speed sync).

4.The external flash discharges the main flash.

Set the SEF-36PZF wireless slave mode to SLAVE1.

156