Using the Built-in Flash

INFORMATION

Switch between Auto discharge mode and Manual discharge mode (Flash ON) by pressing the

button while the built-in flash is popped up.If Auto discharge is set, appears on the LCD panel.3.Press the shutter release button fully. The picture is taken.4.Push down on the portion indicated in the illustration to retract the flash.Using Manual Discharge (Flash ON) , 1. Press the button.The built-in flash pops up and begins charging.

Manual discharge mode (Flash ON) is used regardless of flash mode settings. When the flash is fully charged, appears in the LCD panel and viewfinder.

INFORMATION

When Flash mode is set to or and you pop up the built-in flash, you can switch between Auto discharge mode and Manual discharge mode (Flash ON) by pressing the button under the following conditions.

- Shooting mode is set to , , , ,,- mode is set to , , ,

2.Press the shutter release button fully. The flash discharges and the picture is taken.

3.Push the flash down to retract.

51