Samsung ER-GX1LZBBA/NL Discharge, Set to Night, Museum. p.47, Camera does System does not

Troubleshooting

Problem

Cause

Remedy

AE lock is not

AE lock function

available when set

Use AE lock with any setting other than

(Manual)

does not operate

to

(Manual) mode

mode or

(Bulb) mode.

or

(Bulb) mode

When flash mode is

set to [Auto

discharge] or [Auto

Set flash mode to [Manual discharge] or [Manl

flash+Redeye

flash+Redeye reduct]. (p.49)

reduct], the flash will

not discharge if the

Built-in Flash

subject is bright

does not

Mode dial is set to

Set mode dial to any setting other than

(Flash OFF).

discharge

a

(Flash OFF)

(p.45)

(Scene) mode is

Set

mode to any setting other than

(Night

set to

(Night

Scene),

(Sunset),

Scene),

(Sunset),

(Candlelight) or

(Candlelight) or

(Museum). (p.47)

(Museum)

The power zoom

The camera does

system does not

not have the power

Use manual zoom. (p.48)

function

zoom function

USB connection

The transfer mode is

Set transfer mode to [PC].

set to [PictBridge]

with computer

does not work

An error occurred

properly*

while sending USB

Change the transfer mode to [PC-F].

data

USB connection

with printer does

The transfer mode is

Set transfer mode to [PictBridge]. (p.84)

not work properly

set to [PC] or [PC-F]

*In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.

*Refer to the software instructions for details on connecting the camera to a PC. (p.173)

201