
Using the Built-in Flash
Using
You can use
INFORMATION
Using (Shutter Priority) Mode
1.Set the mode dial to
.
b (Shutter Priority) mode is set.
2.Use the
The background is not properly corrected if aperture value is flashing when shutter speed is set. Set the shutter speed so that aperture does not flash.
3.Press the button. The flash pops up.
4.Take the picture.
Using (Manual) Mode
1.Set the mode dial to . a (Manual) mode is set.
2.Set the shutter speed (under 1/180 sec.) and aperture value to obtain correct exposure.
3.Press the button. The flash pops up.
In (Manual) mode, pop up the flash at any time.
4.Take the picture.