Samsung NX10RP1N9W NX10 Wireless LAN Related, 3.Under See Also, click Phone and Modem Options, 2.Click Start > Control Panel > Network and Internet Connections

Q4 How do I receive a fax while the system is in power saving mode (Rest mode) (For Windows XP and 2000)?

ATo receive a fax when the system is in power saving mode, and the operating system is Windows XP or 2000, configure the system as follows:

1.The automatic fax reception function of the fax program needs to be activated. (For more information, refer to the corresponding fax program manual.)

2.Click Start > Control Panel > Network and Internet Connections.3.Under See Also, click Phone and Modem Options.4.In the Modems tab, select the installed modem, and click Properties.

5.In the Power Management tab of the Modem Properties window, select the "This device activates the computer in power saving mode" check box, and click OK.

The above setting enables the modem to turn on the system and receive a fax when in power saving mode.

Wireless LAN Related

Q1 The Wireless LAN device is operating properly, but I cannot connect to the network.

This is due to an incorrect configuration, or a configuration error. Check the following check lists:

A1 If you are using a computer-to-computer network (peer-to-peer) connection, check that the name of the configured network is correct. The network name used to connect should be the same in all computers. The network name is case sensitive, if the name contains letters.

A2 If you are using a network key (encryption key), an AP (Access Point) and a computer-to-computer network (peer-to-peer), you have to use the same network key. The network key of the AP is configured in the AP management program. Ask your network administrator for more detailed information.

A3 Check that the device driver is properly installed. If the driver is not properly installed, you will find a yellow exclamation mark on the network icon by clicking Start > Control Panel > Performance and Maintenance > System > Hardware tab > Device Manager > Network adapters > Wireless LAN adapter. If there is a yellow exclamation mark, please reinstall the device driver with the system software CD.

Troubleshooting 87