Samsung NX10PRTV04/SEK, EV-NX10ZZBABZA manual To create a computer-to-computer Ad Hoc network

-Data encryption (WEP): IEEE 802.11 WEP (Wired Equivalent Privacy) standard has two security levels of 64-bit key (40-bit key for some cases) and 128-bit key.

-Key index: Select the current encryption key index used by the access point out of 1 to 4.

-To use pass phrase: Click Use pass phrase to activate, and enter 5 (for 64- bit) or 13 (for 128-bit) alphanumeric characters (represented by 0-9, a-z, or A- Z).

-To use WEP key: Click Use WEP keys to activate, and enter a hexadecimal number (represented by 0-9 and A-F) of 10 (for 64-bit) or 26 (for 128-bit) digits in the WEP key field.

When a wireless connection to an access point is established, connection icon ( ) appears in front of the name of connected profile.

To create a computer-to-computer (Ad Hoc) network:

To create a new computer-to-computer (Ad Hoc) network or to connect to a hidden access point (Stealth/Closed Mode), refer to the following procedures.

A hidden access point is an access point that exists, but is configured not to be detected by the scan operation to prevent access attempts from unauthorized users.

1.Click Add in the Networks tab.

2.Enter Profile Name and Network name (SSID), select Operating Mode, then click Next.

What is a network name (SSID)?

Network name (SSID) is a name that a wireless adapter uses for identifying connection. Enter the name of computer-to-computer network to create (e.g., P2P) or the name of access point to connect. The network name identifies cases. (capital and lowercase) For the name of access point, check the settings of the access point, or ask your wireless network administrator.

Operating Mode:

-Infrastructure - Connect to an Access Point - Select to connect to an access point.

-Ad hoc - Connect directly to other computers - Select to create a computer-to-computer (Ad Hoc) network.

Connecting to the Internet 35