Samsung EV-NX10ZZBABZA, NX10RP1N9W/SEG Using the Disk Drives, Using the CD-RW/DVD-ROM Combo Drive

Using the Disk Drives

Using the CD-RW/DVD-ROM Combo Drive

You have to install the CD Writer software provided on a separate CD to write a CD. For more information, read the manual included in the CD.

You have to install the DVD software provided on a separate CD to view a DVD title.

1.Press the button on the CD-RW/DVD-ROM Combo drive, and the tray slides out.

CD-ROM Drive Warnings:

Do not place reflective objects other than the CD/DVD disks in the disk slot because of possible hazardous laser emissions. The laser beam used in this CD-ROM drive is harmful to the eyes. Do not attempt to disassemble the CD- ROM drive. Refer servicing to your authorized service center.

Please do not lean or exert undue pressure on the CD-ROM tray as it may cause damage not covered under warranty.

CD-ROM Precautions:

The tray may be stuck, in which case straighten out a paper clip, insert it into the Emergency Eject hole in the front of the CD-RW/DVD-ROM Combo drive and push it until the tray ejects.

A LED on the drive tray is on when the computer is reading from a CD. Do not remove a disc when this LED is on.

To clean a CD/DVD, wipe from the center outwards with clean and dry cloth. Remove the CD/DVD when the drive CD-ROM LED is off.

2.Insert a CD/DVD, label side up (or remove a disc, if you have finished using it).

44 Users Manual