Samsung NX10RP1N9W NX10 Configuring the Wired LAN Connections, Cable Connection, If you use a simple terminal program (i.e. hyper terminal):

If you use a simple terminal program (i.e. hyper terminal):Type the “ATX3&W” or “ATX3” command as an initialization command.

MODEM Notes:

1. In order to use the V.90 feature, be sure to check if the standards supported by the on-line service provider and the modem are identical. Download speed is limited to 53Kbps. Upload speed is limited to 31.2Kbps. Speeds can vary by line condition.

2.If you use a PBX phone system, you can not connect using the V.90 mode.

3.Internationally connected calls will be limited to 33.6K (Max.)

Configuring the Wired LAN Connections

You may connect to the network using either a LAN cable or by establishing a wireless connection if factory option is installed.

Cable Connection

Install the LAN cable by simply plugging the cable into the slot in the left side of the computer.

Your computer’s LAN adapter is ready to use for most situations, however if your system does not have access to a DHCP server or you wish to personally configure your LAN connection, proceed as outlined in “Configuring Network Environment” below.

Network Protocols:

You may need to consult your SysAdmin if their network protocols and settings are required for your LAN environment.

22 Users Manual