Samsung HMX-W200TP Getting started, CHARGING THE BATTERY

Getting started

CHARGING THE BATTERY

Battery for this product is equipped inside the product.

• Be sure to charge the battery before you start using your product.

• You can charge the battery with the built-in USB plug.

1

2

2

1

1Press the Power () button to turn off the product.

2Slide and open the Open/Close lever in the direction of the arrow to pop out the built-in USB plug, as shown in the figure.

•When you press the USB open lever, the USB plug will pop out if the built-in USB plug cover is open.

3Connect the built-in USB plug of the product to the USB port of a PC and please check if the USB port complies with the standard of rated power limit.

•The charging (CHG) indicator lights up and charging starts. After the battery is fully charged, the charging (CHG) indicator turns green.

4When the charging is completed, detach the USB plug from the PC, and then push in the built-in USB plug.

5Slide and close the Open/Close lever in the direction of the arrow to close the built-in USB plug cover, as show in the figure.

• Do not push the built-in USB plug forcibly.

• Depending on your computer environment, you can attach an external USB cable (not supplied) to the product’s USB plug and your computer’s USB port to charge the product.

•The battery is not charged while you are operating the product connected to a PC. Turn the product off and then charge the battery by connecting the built-in USB plug of the product to a PC.

21