Using with a Windows computer

USING THE Intelli-studio PROGRAMME

3 Click "Yes" in the new file saving window. The uploading

Intelli-studio is a built-in programme that allows you to play back and edit files. You can also upload files to web sites, such as YouTube or Flickr.

Step 1. Connecting the USB plug

1Set "PC Software" to "On". ￿page 62

This is the default setting.

2Connect the built-in USB plug of the product to the USB port of your PC.

A new file saving window appears along with the Intelli-studio main window. If your product has no new files, the pop-up window for saving new files will not appear.

Depending on your version of Windows, the Windows removable disk window may also appear.

66

procedure starts. Click "Yes" to confirm.

If you do not want to save any new files, select "No".

To disconnect the USB plug

To disconnect the USB plug after completing the file transfer, you must follow these steps:

1.Click the "Safely Remove Hardware" icon on the taskbar.

2.Select "USB Mass Storage Device", and then click "Stop".

3.If the "Stop a Hardware device" window appears, click "OK".

4.Disconnect the product’s built-in USB plug from the PC.

• Make sure you insert the USB plug into the USB port with the plug facing in the correct direction.

When the built-in USB plug is connected, turning the product on or off may cause the PC to malfunction.

If you disconnect the product’s built-in USB plug from the PC while transferring files, the data transmission will stop and the data may be damaged.

If you connect the built-in USB plug to a PC via a USB HUB or simultaneously connect the built-in USB plug along with other USB devices, the product may not work properly. If this occurs, remove all USB devices from the PC, and then reconnect the product.

Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer, open the drive that corresponds to your product, find Intelli-studio, and then run IStudio.exe.

The product turns off if you remove its USB plug from the USB port of the computer.