Caring for water/dust/shock-proof capability
After using the product in water, rinse to remove foreign substances or salt from the product within 1 hour.
1Gently shake the product to rinse after sinking it in clean water for 2~3 minutes.
•Hold the product with the cleaned part facing down, and then gently shake the product.
•Bubbles may appear when the product is soaked in water. This is not a malfunction.
•When the product is not rinsed completely, the waterproof performance may deteriorate.
•Press each button of the product to remove salt or other foreign substances between/around the buttons.
•Do not use chemicals to clean the product including soap, neutral detergent or alcohol. It may damage the product’s
3Dry the product completely in a well ventilated and shaded area.
•This product is designed to be well drained. The water drains through the small holes around the buttons on the product.
•Do not use a device such as a hair dryer to dry the product. The water- proof performance may deteriorate or the appearance of the product can be transformed.
•Do not open the memory card/HDMI jack cover and the USB plug cover until the product has dried out.
•Do not open or close the memory card/HDMI jack cover or USB plug
cover while on the beach or near water. It may introduce water or other foreign substances into the product.
2Wipe off the water droplets from the product with a soft and dry cloth after removing it from water.
•Do not open the memory card/HDMI jack cover or USB plug cover if this product is wet. It may introduce water or other foreign substances into the product.
•If there is water on this product, wipe it off with a soft and dry cloth until it is completely dry.
•Change the memory card in a dry place protected from sea breezes.
•After using the product under/near water, dry the internal microphone and speaker of the product completely. Not doing so may decrease the audio quality during video recording or playback.
•Do not poke the speaker or microphone of the product with any sharp object.
iii