Samsung HW-D770S HW-D700/EN, HW-D700/XE, HW-D770S/EN Setting the Speaker Level, English

Setting the Speaker Level

You can set the balance and level of speakers.

1.Press the SETUP/MENU button on the remote control.

•Each time the button is pressed, the mode switches between

INPUT and SETUP OFF.

2.	Press the ▲▼ buttons to select SPEAKER, and then press	
	the ENTER button.
3.
	Press the ▲▼ buttons to select SPK LEVEL, and then press
	the ENTER button.
4.	Press the ▲▼ buttons to select the speaker you want.	
	• Each time you press this button, F.L  F.R CEN  S.L 
	S.R  SBL  SBR  S.W will be selected in turn.

5. Press the ◄ ► buttons to set the Speaker Level mode.

•You can adjust it from -10 to +10dB in 1 step increments.

•The sound gets quieter at -10dB and louder at

+10dB.				SPEAKER LEVEL
		FRONT LEFT	◄	0dB ►
		FRONT RIGHT		0dB
		CENTER		0dB
		SURROUND LEFT		0dB
		SURROUND RIGHT		0dB
				▼
- Setting Speaker Level -		> MOVE	SELECT ' RETURN	EXIT
• F.L (front left) : -10 ~ +10dB	• SW (subwoofer) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB	• SBL (surround back left) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB	• SBR (surround back right) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB	• FHL (front height left) : -10 ~ +10dB
• CEN (centre) : -10 ~ +10dB	• FHR (front height right) : -10 ~ +10dB

✎NOTE

If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front Height Speaker (FHL/FHR).

You can also change the subwoofer level by using the SUBWOOFER, <, > buttons on the remote control.

Setup 03

English 39

HW-D700_D770S_ELS_0609.indd 39 2011-06-09 ￿￿ 5:38:31