Setup
Setting the Speaker Listening Distance
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the centre and surround speakers.
1.Press the SETUP/MENU button on the remote control.
•Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
2.Press the ▲▼ buttons to select SPEAKER, and then press the ENTER button.
3.Press the ▲▼ buttons to select SPK DISTANCE, and then
press the ENTER button.
4.Press the ▲▼ buttons to select the speaker you want.
•Each time you press the ▲▼ buttons, F.L F.R CEN S.L S.R SBL SBR S.W will be selected in turn.
5. Press the ◄ ► buttons to set the Speaker Distance.
•For the FRONT LEFT, FRONT RIGHT, CENTER, SURR.
LEFT, SURR. RIGHT, SURRBACK.LEFT, SURRBACK.RIGHT and SUBWOOFER Speakers, you can set the distance from the speaker to
listening position between 1ft ~ 30ft (0.3~9.0m) in intervals of 1ft (0.3m).
SPEAKER DISTANCE
3 . 0m ►
3 . 0m
3 . 0m
3 . 0m
3 . 0m
▼
> MOVE |
| SELECT ' RETURN | EXIT |
| |||
|
|
|
|
- Setting Speaker Distance -
Set the distance from the speaker to listening position in intervals of 1ft(0.3m).
• F.L (front left) : 0.3 ~ 9.0m | • SW (subwoofer) : 0.3 ~ 9.0m | |
• F.R (front right) : 0.3 | ~ 9.0m | • SBL (surround back left) : 0.3 ~ 9.0m |
• S.L (surround left) : 0.3 ~ 9.0m | • SBR (surround back right) : 0.3 ~ 9.0m | |
• S.R (surround right) : 0.3 ~ 9.0m | • FHL (front height left) : 0.3 ~ 9.0m | |
• CEN (centre) : 0.3 ~ | 9.0m | • FHR (front height right) : 0.3 ~ 9.0m |
✎NOTE
If the listening position is beyond the range of the speaker distance setup, set the speaker distance to the maximum.
If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front Height Speaker (FHL/FHR).