Connections
Disconnecting an iPod
Follow the steps below to prevent damage to an iPod and data when disconnecting from your AV receiver.
1.Use the INPUT SELECT on the main unit to switch to a mode other than IPOD AUDIO or IPOD VIDEO.
OR
1.Turn off the AV Receiver.
2.Disconnect the iPod player from the iPod dock, or remove the iPod dock connector from the AV receiver.
iPod/iPhone Models You Can Use with This Product
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod with dock connector
iPod with Click Wheel
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
✎NOTE
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPods and has been certified by the developer to meet Apple performance standards.
“Made for iPhone” means that an electronic accessory has been designed to connect specifically to iPhones and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.