Setup
Setting NEO:6 Mode
You can play back 2 channel sound over 5.1 or 7.1 channels when enjoying music or a movie.
1.Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between INPUT and SETUP OFF.
2.Press the ▲▼ buttons to select SURROUND, and then press the ENTER button.
3. | Press the ▲▼ buttons to select DTS NEO:6, and then press |
|
4. | the ENTER button. |
|
| ||
Press the ENTER buttons to set the | | |
| Press the ◄ ► buttons to set the |
|
| This parameter adjusts the centre image through the front and |
|
| centre speakers. "5" is the wider. |
|
Using NEO:6 Mode
Press the NEO:6 button on the remote control.
• MUSIC : When listening to music, you can experience sound effects as if you are listening to the actual performance.
•CINEMA : Adds realism to the movie soundtrack.
•OFF : Output the original signal as it is without applying the sound field effect or any other sound effect.
✎NOTE
NEO:6 works only for
Setting EX/ES Mode
When surround back speakers are connected, you can listen to 7.1
1.Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between INPUT and SETUP OFF.
2.Press the ▲▼ buttons to select SURROUND, and then press the ENTER button.
3. | Press the ▲▼ buttons to select EX/ES, and then press the |
|
| ENTER button. | |
4. | Press the ▲▼ buttons to set the EX/ES mode you want. |
•AUTO : If the unit receives an audio signal that it can recognize, it will select an optimal decoder for playback in
7.1 channels. |
| |
If the amplifier does not recognize the audio signal, it will not |
| |
| ||
play in 7.1 channel automatically. | ||
• OFF : Dolby Digital Surround EX / DTS ES decoder will not |
| |
| ||
be used for playback. |
| |
• ON : Dolby Digital or DTS signal will be played in 7.1 channel |
| |
using Dolby Digital Surround EX / DTS ES decoder. |
|
✎NOTE