Samsung HW-D770S HW-D700/EN, HW-D700/XE, HW-D770S/EN Selecting a Source Device And Connection Jack (Digital Audio In), Setting the Speaker Size, Audio Setup, English

Audio Setup

Selecting a Source Device And Connection Jack (Digital Audio In)

Select the external devices you have connected to the receiver.

1.Press the SETUP/MENU button on the remote control.

• Each time the button is pressed, the mode switches

	between INPUT and SETUP OFF.
2.	Press the ENTER button to select INPUT.	
3.	Press the ENTER button to select INPUT SELECTION.
4.	Press the ▲▼ buttons to select a desired jack.
	• Devices switch as follows; BD/DVD, SAT, CD
✎NOTE		
	You can also use the SETUP, ,,., ENTER, RETURN
	buttons on the front of your AV Receiver.

Setting the Speaker Size

Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not.

1.Press the SETUP/MENU button on the remote control.

•Each time the button is pressed, the mode switches between INPUT and SETUP OFF.

2.	Press the ▲▼ buttons to select SPEAKER, and then press
	the ENTER button.
3.		
	Press the ▲▼ buttons to select SPK SIZE, and then press the
	ENTER button.
4.	Press the ▲▼ buttons to select the speaker you want, and
	then press the ENTER button.	
	• Each time you press the ▲▼ buttons, FRONT
	CENTER  SURR  SBACK(DPLIIx) / FRONTH(DPLIIz) 
	 SUBW  CROVR will be selected in turn.
5.	Press the ▲▼ buttons to set the mode (LARGE, SMALL etc.)
	for the selected speaker.
6.	Repeat steps 2-5 to set the mode for each speaker.

					SPEAKER SIZE
		FRONT
				LARGE:SMALL
		CENTER		SMALL:SMALL
		SURROUND
	USER			:	SMALL
		SURROUND BACK		:	SMALL
		SUBWOOFER		:	YES
		CROSSOVER		:	100Hz
> MOVE		SELECT	' RETURN		EXIT

Setup 03

English 35

HW-D700_D770S_ELS_0609.indd 35 2011-06-09 ￿￿ 5:38:28