Samsung HW-D770S HW-D700/EN, HW-D700/XE, HW-D770S/EN Connecting the Bi-AMPSpeaker, 18 English, Connections

Connections

Connecting the Bi-AMP Speaker

Connect the tweeter (high range) port and woofer (low range) to the front port and surround back speaker port respectively as appropriate. Then, you can use the bi-amplification feature that supports enriched high range and base tones.

Bi-AMP Speaker R	Bi-AMP Speaker L
Tweeter	Tweeter
Woofer	Woofer

LINE OUT	SUBWOOFER
	OUT

1.Connect the FRONT L connector (rear side of main unit) to the Tweeter port in the front left speaker.

2.Connect the FRONT R connector (rear side of main unit) to the Tweeter port in the front right speaker.

3.Connect the SURROUND BACK L connector (rear side of main unit) to the Woofer port in the front left speaker.

4.Connect the SURROUND BACK R connector (rear side of main unit) to the Woofer port in the front right speaker.

!CAUTION

If Bi-amp is active, you may encounter a restricted access if you have not removed the shorting bar (like a jumper) in both tweeter and subwoofer ports in the front speaker.

Before you can use bi-amp, ensure that you use a speaker that supports bi-amplifying.

✎NOTE

To enable the Bi-Amp feature, you must set 7.1 CHANNEL to Bi-AMP in SETUP menu. See page 37.

With the Bi-amp feature, you can use up to 5.1 channels for speaker output in the main unit.

18 English

HW-D700_D770S_ELS_0609.indd 18 2011-06-09 ￿￿ 5:37:46