Samsung HW-H600 +Installing the Batteries in the Remote Control, MUTE, POWER, VOLUME, Skip Back, AUDIO SYNC, SOUND EFFECT, AUDIO SYNC +, REMOTE CONTROL, Bluetooth POWER

REMOTE CONTROL

POWER

Turns the SoundStand on and off.

MUTE

You can turn the volume down to 0 with the push of a button. Press again to restore the sound to the previous volume level.

VOLUME

Adjusts the volume level of the unit.

SOUND EFFECT

Press to select a sound effect mode. Select the STANDARD mode if you want to enjoy the original sound.

When you choose a Sound Effect mode (except STANDARD), Surround Sound Expansion will automatically be turned OFF.

Skip Back

If there is more than one file on the device you are playing, and you press the # button, the previous file is selected.

Bluetooth POWER

Press the Bluetooth POWER button on the remote to turn the Bluetooth Power function on and off.

See pages 16 and 18 for details.

AUDIO SYNC

If the SoundStand is connected to a digital TV and the video appears out of synch with the audio, press the Audio Sync buttons to synch the audio with the video.

Press the AUDIO SYNC +/- buttons to set the audio delay from 0 to 300 ms. In USB mode, TV mode, or BT mode, the Audio Sync function may not work.

+Installing the Batteries in the Remote Control

POWER

SOURCE

MUTE

	VOL		WOOFER
			LEVEL
		Surr.
		Sound
SOUND			DIMMER
EFFECT		SYNC
Bluetooth		SYNC
POWER			REPEAT

1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.

2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '' marks side by side as shown in the figure above.

3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.

10