Samsung HW-H600 TV SOUNDCONNECT, +Connecting a TV to the SoundStand, +Using the Bluetooth POWER On function, <Yes, FUNCTIONS, Bluetooth POWER

FUNCTIONS

TV SOUNDCONNECT

You can enjoy TV sound through your SoundStand connected to a Samsung TV that supports the TV SoundConnect function.

+Connecting a TV to the SoundStand

Connect

1.Turn on the TV and SoundStand.

•Turn on the menu of the TV.

•Move to Speaker Settings on "Sound" tab.

•Set the "Add New Device" menu to "On".

2.Press the ( ) button on the main unit’s top panel or the SOURCE button on the remote control to select the TV mode.

3.On the TV, a message asking whether to enable the TV SoundConnect function. "[Samsung] SoundStand" is displayed on the TV screen.

4.Select <Yes> to finish connecting the TV and SoundStand by TV remote control.

● Switching the SoundStand’s mode from TV to another automatically terminates TV SoundConnect.

●To connect the SoundStand to another TV, the existing connection must be terminated.

●Terminate the connection to the existing TV,

then press the button on the remote control for 5 seconds to connect to another TV.

● The TV SoundConnect (SoundShare) function is supported by some Samsung TVs released from 2012 on. Check whether your TV supports the TV SoundConnect (SoundShare) function before you begin. (For further information, refer to the TV’s user manual.)

●If your Samsung TV is released before 2014, check the SoundShare setting menu.

●If the distance between the TV and SoundStand exceeds 5m, the connection may not be stable or the audio may stutter. If this occurs, relocate the TV or SoundStand so that they are within operational range, and then re-establish the TV SoundConnect connection.

● TV SoundConnect Operational Range

-Recommended pairing range: within 50cm

-Recommended operational range: within 5m

●Play/Pause, Next, Prev buttons are not operable in TV SoundConnect mode

+Using the Bluetooth POWER On function

The Bluetooth POWER On function is available after you have successfully connected the SoundStand to a Bluetooth compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on or off will turn the SoundStand's power on and off as well.

1.Connect the TV with your SoundStand using the TV SoundConnect function.

2.Press the Bluetooth POWER button on the SoundStand remote. "BLUETOOTH POWER ON" appears on the SoundStand's display.

•BLUETOOTH POWER ON : The SoundStand turns on and off when you turn the TV on or off.

•BLUETOOTH POWER OFF : The SoundStand only turns off when you turn the TV off.

● This function is supported only by some Samsung TVs released from 2013 on.

18