•On : The original resolution of the DVD disc will be output to the TV direct.
•Off : The output resolution will be fixed according to the Resolution previously set, regardless of the resolution of the disc.
NOTES
\\ This will optimize the picture quality according to the content (In the DVD disc, etc) that you want to play and the product or your BD
\\ If you want to change the resolution in BD Wise mode, you must set BD mode to Off in advance.
\\ BD Wise will be disabled if the product is connected to a device that does not support BD Wise.
Resolution
Sets the output resolution of the HDMI video signal. The number in 480p(576p), 720p, 1080i and 1080p indicates the number of lines of video.
The i and p indicate interlace and progressive scan, respectively.•480p(576p) : Outputs 480 lines of progressive video.•720p : Outputs 720 lines of progressive video.•1080i : Outputs 1080 lines of interlaced video.•1080p: Outputs 1080 lines of progressive video.•BD Wise : Automatically sets the optimal resolution when connected via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On.)
NOTES
\\ If Component or Composite is connected, the resolution supports only 480i(576i).
\\ 1080P may not appear depending on TV.
Video Out Signal
Different countries apply different TV standard.You can select from NTSC or PAL.
•NTSC : You can set to the NTSC video format•PAL : You can set to the PAL video formatNOTE
\\ Depending on the type(NTSC or PAL) of main unit you have, the TV screen displayed may be different.
HDMI Format
You can optimize the color setting from the HDMIoutput. Select a connected device Type.• Monitor : Select if connected to a Monitor via HDMI.• TV : Select if connected to a TV via HDMI.Audio
DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
•You can select either Full, 6/8, 4/8, 2/8, Off.
AUDIO-SYNC
Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to
match the video.•You can set the audio delay time between 0 mS and 300 mS. Set it to the optimal status.
Speaker Selection
The audio signals transmitted over the HDMI Cable can be changed Audio System/TV Speaker.
•Audio System : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers
only.
• TV Speaker : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
NOTES
\\ The default setting of this function is Audio System . \\ HDMI Audio is automatically
speakers.
\\ When TV Selection is set to TV Speaker, EQ/POWER BASS/Recording/MY KARAOKE/VOL/MUTE doesn't work.
\\ With Speaker Selection set to 'TV Speaker', the volume can be adjusted only using the TV remote control.