Basic Functions
\\ Once you have turned off the Micro Component and pairing is terminated, pairing will not be restored automatically. To reconnect, you must pair the device again.
\\ The Micro Component system may not search or connect properly in the following cases:
-- If there is a strong electrical field around the Micro Component.
-- If the Bluetooth device is turned off, not in place, or malfunctions.
\\ Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference.
To disconnect the Bluetooth device from the Micro Component
You can disconnect the Bluetooth device from the Micro Component. For instructions, see the Bluetooth device's user manual.
•The Micro Component will be disconnected.
•When the Micro Component is disconnected from the Bluetooth device, the Micro Component will display BT DISCONNECTED ; BT READY on the its display.
To disconnect the Micro Component from the Bluetooth device
Press the another mode button on the top panel of the Micro Component to switch from Bluetooth mode to another mode or turn off the Micro Component. The currently connected device is disconnected.
NOTES
\\ The connected Bluetooth device will wait a certain amount of time for a response from the Micro Component before terminating the connection.(Disconnection time may differ, depending on the Bluetooth device)
\\ In Bluetooth connection mode, the Bluetooth connection may be lost if the distance between the Micro Component and the Bluetooth device exceeds 16.25 feet (5 meters).
\\ If the Bluetooth device comes back into the effective range after disconnecting, you can restart the Micro Component to restore the pairing with the Bluetooth device.
\\ The Micro Component automatically turns off after 25 minutes in the Ready mode.
\\ When a Bluetooth device is connected to the Micro Component system, the Component system automatically switches to the Bluetooth mode if it is in a different mode (except when it is displaying "REQUEST" in the TV SoundConnect mode if the Bluetooth device haven't been paired with the Micro Component before.).