Listening to the Radio
To Store the Stations You Want
You can store up to15 FM stations.
1 . Select FM by pressing the SOURCE button.
2 . To search for a station, press the STOP button on the product one or more times until MANUAL is displayed.
3.Select a station by:
•Pressing and holding the TUNING1, 2 button on the remote control to automatically search for active broadcasting stations.
4.Press the MO/ST button to switch between stereo and mono.
•In a poor reception area, select MONO for a clear,
•This applies only when listening to an FM station.
5 . If you do not want to store the radio station found, go back to Step 3 and search for another station.
Otherwise:
a.Press the ENTER button.
•FM followed by a flashing number appears in the display. That number is the current preset number.
b.Press the $, % buttons to scroll through and select a preset number.
•You can select a number from 1 to 15.
c.Press the ¬ button to save the preset.
6 . To store additional radio stations, repeat Steps 3 to 5.
NOTES
✎✎In Tuner mode
•In the Manual mode, you can use the 1 or 2 button to change stations.
•In the Preset mode, you can use the 1 or 2 button to search for a stored radio station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1 . Select FM by pressing the SOURCE button.
2 . Press the STOP button until “PRESET” is displayed.
3 . Press TUNING 1, 2 on the remote control to select a preset number.
Display Function
You can view all functions available on the display, adjust the brightness of the display.
1.Each time you press the DISPLAY button on the remote control, the display mode will change as following:
`` The Dimmer function
The Dimmer function is selected and the display darkens.
`` Display ON
The Display turns on.
`` Clock ON
The Clock you set is displayed.
English 21