1. Manuals
  2. Brands
  3. Home Audio
  4. Audio
  5. Samsung
  6. Home Audio
  7. Audio

Samsung MM-J430D MM-J430D/EN, MM-J430D/XN, MM-J430D/ZF TV SoundConnect, Connecting the Micro Component to a SoundConnect Compatible Samsung TV, Basic Functions, | 20 English

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Download on canonical page 30 pages, 0 b

Basic Functions

TV SoundConnect

You can listen to the sound from your SoundConnect Compatible Samsung TV through the Micro Component by using the TV SoundConnect function.

Connecting the Micro Component to a SoundConnect Compatible Samsung TV

Before activating this function, be sure to activate the Samsung TV's SoundConnect or SoundShare mode.

1.Press the SOURCE button to display the TV SOUND CONNECT message.

WAIT ; SEARCH ; REQUEST

2.Set Add New Device to On in the TV's SoundConnect Settings menu. (Refer to the TV's user manual for details.)

3.When the Micro Component is connected to the TV, it will display [TV] Name ; CONNECTED; TV on the front display.

4.The audio from the connected TV plays over the Micro Component audio system.

In TV SoundConnect mode, the Play/ Repeat/Stop/Next/Back functions are not available.

The SoundConnect feature is available on some Samsung TVs released since 2012. Check whether your TV supports the SoundShare or SoundConnect function. (For further details, refer to the TV's user's manual.)

If you unplug the Micro Component, the TV SoundConnect connection is terminated. To re-establish the connection, plug the Micro Component into an outlet, and then set the TV SoundConnect connection again.

Only one Micro Component at a time can be connected to a TV via TV SoundConnect.

To connect to another TV in TV Soundconnect mode, press the p button on the main set for more than 5 seconds, and then connect to the other TV by following the directions above.

To disconnect the TV from the Micro Component

You can disconnect the TV from the Micro Component.

For instructions, see the TV's user manual.

When the Micro Component is disconnected from the TV, the Micro Component will display TV DISCONNECTED ; REQUEST on its display.

To disconnect the Micro Component from the

TV

Press another mode button on the top panel of the Micro Component to switch from TV SoundConnect mode to another mode or turn off the Micro Component. The currently connected device is disconnected.

The connected TV will wait a certain amount of time for a response from the Micro Component before terminating the connection.(Disconnection time may differ, depending on the TV)

The connection may be lost or sound may stutter if the distance between the TV and the Micro Component exceeds 6.5 feet (2 m).

Instability in the network environment may cause the connection to be lost or sound to stutter.

In TV SoundConnect mode, the Micro Component automatically turns off after 25 minutes if it is not connected to a TV.

20 English

MENU

Models

Contents