Using Bluetooth Power On
When the product is turned off, you can connect your smart device to the product via a Bluetooth connection to turn it on.
1 . Press and hold the SOURCE button to set the Bluetooth Power On function on. ON- BLUETOOTH POWER appears on the display.
2 . When the product is off, connect your smart device to the product via Bluetooth. (For information on Bluetooth connections, refer to your smart device’s manual.)
•The Bluetooth device must have been paired with the Micro Component before.
3 . When the connection is complete, the product turns itself on automatically in Bluetooth mode.
•Select the desired music to play from your smart device.NOTE\\ Press and hold the SOURCE button to turn the Bluetooth Power On function on or off. Each time you press and hold this button, the Micro Component displays ON
Software update
Samsung may offer updates for the product's system firmware in the future.If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your product.
Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung Call Center to receive more information about downloading updates files.
•Select USB function, insert a USB device containing the firmware update into the USB port on the main unit.
•Updating firmware may not work properly if audio files supported by the product are stored in the USB storage device.
•Do not disconnect the power or remove the USB device while updates are being applied. The main unit will turn off automatically after completing the firmware update.
•After the update, all settings are reset to their factory default settings. We recommend you write down your settings so that you can easily reset them after the update.
If the firmware fails to update, we recommend formatting the USB device in FAT16/FAT32 and trying again.
•Once the software update is completed, turn on the product with no disc inserted. The “NO DISC” message appears on the display. Press and hold the STOP button on the main unit for longer than
5 seconds. “INIT ” appears on the display and the unit powers off. The upgrade is complete.
•Do not format the USB device in the NTFS format. The product does not support the NTFS file system.
•Depending on the manufacturer, some USB devices may not be supported.•The product has a DUAL BOOT function. If the firmware fails to update, most functions will become inoperable and "UPGRADE FIRMWARE" will appear on the display. Update the firmware again.