Introduction
Connect the AV IN [VIDEO] terminal of your monitor to the video output terminal of the external device using a VIDEO cable.
Headphone/External speaker output termi- nal.
Connect the HDMI terminal at the back of your PDP Display to the HDMI terminal of your digital output device using a HDMI ca- ble.
Up to HDMI cable 1.2 can be supported.
BNC (Analog PC) Connection: connecting the R, G, B, H, V ports.
The number of PDP Displays that can be connected to the loopout depends on the ca- bles, signal source, etc. With cables or signal source where there is no degradation, up to 10 PDP Displays can be connected (May not be supported depending on the connected cable).
- During BNC input, please check specifications for the input ports below.
•[R/PR]
•[G/Y]
•[B/PB]
-During component input, please check specifications for the input ports below.
•[R/PR]
•[G/Y]
•[B/PB]
14