Remember, a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator.
When the left door is lower than the right door.
Adjustment part
When you turn the hex wrench counter-
clockwise (
Only the
1.After adjusting the doors, please insert the supplied fastener ( 5 ) using Pliers ( 6 ) in the gap between the
When the left door is higher than the right door.
Adjustment part
1.Pull out the freezer drawer ( 1 ), then you can see the middle hinge ( 2 ) .
2.Insert the hex wrench (4mm) ( 3 ) into the shaft ( 4 ) of the middle hinge.
3.Please adjust the height by turning the hex
wrench ( 3 ) clockwise (
clockwise (
2
3
4
1
2 fastener are enclosed with the refrigerator. The thickness of each fastener is 1.0mm.
20_ setting up