programs additional
Navigate with GPS data
1.In Standby mode, press [] → Tools → GPS data → Navigation.
2.Press <Options> → Set destination → Coordinates.
3.Enter the latitude and longitude of your destination and the Confirm key.
Your device will display the direction of your destination, your current speed, and the duration of your trip.
4.To stop the GPS navigation, press <Options> → Stop navigation.
View your current position
In Standby mode, press [] → Tools → GPS data → Position.
Monitor trip details
1.In Standby mode, press [] → Tools → GPS data → Trip distance.
2.Press <Options> → Start.
Your device will track trip details, including distance, time, and speed.
3.To stop monitoring trip details, press <Options> → Stop.
Landmarks
With Landmarks, you can save your current location or manually enter new locations.
1.In Standby mode, press [] → Tools → Landmarks.
2.Press <Options> → New landmark → Current position or Enter manually.
To add your current location automatically, your device must have an active connection.
3.Enter details about the landmark (if necessary).
4.When you are finished entering landmark information, press <Done>.
62