USB
Control how your device behaves when you connect it to a PC.
•USB connection mode: set to PC Studio (when using PC Studio to sync files), Mass storage (when using a memory card to transfer files), Image transfer (when printing images), or Media transfer (when transferring media files)
•Ask on connection: set to ask on connection when you connect to a PC
Destinations
Control access point connections, passwords, and homepages.
•Connection name: set a name for the access point connection
•Data bearer: set a data transmission type
•Access point name: set the web address for the access point
•User name: set a user name
•Prompt password: set to ask for a password when you connect to the access point
•Password: set a password for the access point
•Authentication: set an authentication mode
•Homepage: set a homepage for access points that connect to web services
•Use access point: set to ask for your confirmation when you use the access point
You can also define advanced settings for access points: press <Options> → Advanced settings.
•Network type: set a network type (IPv6 or IPv4)
•Phone IP address (IPv4 only): set the IP address of your device
•DNS addresses (IPv4): set primary and secondary domain name server (DNS) addresses or set to 0.0.0.0 for automatic detection
settings
79