Use the LEFT/RIGHT buttons on the front panel or remote control in PTZ Camera Control Mode to control the camera horizontally.
TILTUse the UP/DOWN buttons on the front panel or remote control in PTZ Camera Control Mode to control the camera vertically.
ZOOMPress the TELE/WIDE buttons on the front panel or remote control in PTZ Camera Control Mode to zoom in or out the image displayed.
PRESET SETUP
A preset is a specific position of the PTZ camera and you can store the positions up to 20.
For AD Protocol PTZ camera, you can store up to 7 presets only.To set a preset
1.Press the PRESET button on the front panel or remote control in Single Screen PTZ Camera Control Mode ad select Preset.
PTZ
Preset | Camera Menu | Exit |
|
|
|
No. | Position Name Del |
| |
PTZ Control | |||
1 | Del | ||
|
2Del
3Del
4Del
5Del
6Del
7Del
8Del
Prev Next Exit
3. Press the RIGHT direction button to move the cursor rightward and press the ENTER button. Now perform the PTZ operations to get the wanted position screen and press the ENTER button again to exit from the PTZ motion mode.
4. Press the ENTER button in the Position |
| |
Name field to open the virtual keyboard. | 07 | |
Now enter the position name using the virtual | ||
PTZ | ||
keyboard and press OK to confirm the input. | ||
camera | ||
If you want to delete both position and | ||
| ||
position name, select Del that is located |
| |
in the same row. If you press Del, | control | |
all positions and position names are | ||
removed. | ||
|
CAMERA MENU SETUP
The PTZ camera provides its own menu. This menu enables you to define several conditions for PTZ control.
Only the Pan. and Samsung protocol cameras are authorized for this setup.
To move to the menu screen, press the PRESET button on the front panel or remote control in Single Screen PTZ Camera Control Mode.
PTZ
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Preset | Camera Menu | Exit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|