Samsung SHR-6164P SETTING THE DEVICE, Setting the Camera, 42_ using the DVR, using the DVR, Camera

using the DVR

SETTING THE DEVICE

You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.

Using the mouse may help easy setup.

1.Press the [MENU] button on the remote control or front panel.

2.Use the left/right button (◄ ►) to select <Device>. Device setting menu is selected.

3.Use the up/down buttons (▲▼) to move to <Camera>, and press [ENTER] button.

LogoutExit

Device

Camera

Storage Device

Remote Device

POS Device

Monitor

4.	Select <Camera>.
		Camera
	A window for setting Video, Audio, Channel Name and
		Camera		PTZ
	Dwell Time of a Camera appears.
		CH	Video	Audio	CH Name		SEQ-Dwell Time
5.	Use direction buttons (▲▼◄ ►) to move to a desired	1	ON	OFF	CAM 01		5 sec
		2	ON	OFF	CAM 02		5 sec
		3	ON	OFF	CAM 03		5 sec
	item, and set the value.
		4	ON	OFF	CAM 04		5 sec
		5	ON	OFF	CAM 05		5 sec
		6	ON	OFF	CAM 06		5 sec
• Video		7	ON	OFF	CAM 07		5 sec
		8	ON	OFF	CAM 08		5 sec
-	<ON/OFF> : You can turn ON/OFF the selected					Previous/Next Page
		Screen Setup
	channel’s camera.
				OK	Cancel

-<Covert1> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

-<Covert2> : Shows nothing but an empty screen while the recording continues.

•Audio

-If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.

-If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.

The audio input is available for CH 1, 2, 3, and 4 only while output allows only one channel.

•CH Name : Up to 15 characters including blanks are allowed.

 Refer to “Using Virtual Keyboard”. (Page 36)

•SEQ-Dwell Time: You can set the dwell time between channels for the Live screen and Spot Out.

 If set to <OFF>, the channel is not listed in the Auto Sequence mode.

42_ using the DVR