Switching to Single Mode
In a split mode, select and
Press the number corresponding to a desired channel on the front panel or the remote control to switch to its Single mode.
Refer to “Remote Control>Using the numeric buttons”. (Page 12)
Ex : If
CH1 | CH2 | CH3 | CH4 |
|
CH5 | CH6 | CH7 | CH8 | |
CH9 | CH10 | CH11 | CH12 |
|
CH13 | CH14 | CH15 | CH16 | CH3 |
SPOT OUT
The Spot Out monitoring is independent of the Live mode, which monitors a specifi c channel through the Spot Out port.
Selecting a Spot Out mode
If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you can select a output screen mode.
LIVE
1.In Live mode,
2.Click Spot Out.
The split screen appears according to the Spot Out source. (Page 48)
Spot Out 1 : Supports
Scene Mode |
|
| CH1 |
Spot Out | Spot Out 1 | CH2 | |
| CH3 | ||
Audio Off |
| ||
| CH4 | ||
|
| ||
Freeze |
| ||
| CH5 | ||
Stop Alarm |
|
| |
| Auto Sequence | CH6 | |
Record |
| Single | CH7 |
Play |
|
| CH8 |
Search |
|
| CH9 |
|
| CH10 | |
Backup |
|
| |
|
| CH11 | |
Main Menu |
|
| |
|
| CH12 | |
Shutdown |
|
| CH13 |
Hide Launcher |
|
| CH14 |
Logout |
|
| CH15 |
|
| CH16 | |
|
|
|
< Multichannel Live Menu >