installation
Please be noticed with the followings before you use the product.
•Do not use the product outdoor.
•Do not spill water or liquid in the connection part of the product.
•Do not impose the system to excessive shock or force.
•Do not pull out the power plug forcefully.
•Do not disassemble the product on your own.
•Do not exceed the rated input/output range.
•Use a certifi ed power cord only.
•For the product with an input ground, use a grounded power plug.
CHECKING THE INSTALLATION ENVIRONMENT
•Samsung Digital Video Recorder (“DVR” hereinafter) is a
•When the temperature rises inside the product, the product may breakdown and the product life be shortened. Please pay attention to the following recommendations before installation.
Temperature Unit: ºC
One Year: 24HR X 365 DAY =8,760 HR
Life (Unit: HOURS)
The followings are the recommendations when Samsung DVR is installed on a rack.
1.Please ensure that the rack inside is not sealed.
2.Please ensure the air is circulated through the inlet/outlet as shown in the picture.
3.If the DVR or other devices on a rack is to be stacked as in the picture, provide a suitable space or install a ventilating opening for air circulation.
4.For natural air convection, place the inlet at the bottom of the rack and the outlet on top.
5.It is strongly recommended that a fan motor is installed at the inlet and the outlet for air circulation. (Please fi t a fi lter at the inlet to screen dust or foreign substances.)
6.Please maintain the temperature inside the rack or surrounding areas between 0°C ~ 40°C (32°F ~ 104°F) as shown in the fi gure 1.
Rack Mount Instructions - The following or similar
A)Elevated Operating Ambient - If installed in a closed or
B)Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air fl ow required for safe operation of the equipment is not compromised.
[Figure 1]
[Figure 2]
C)Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
D)Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
E)Reliable Earthing - Reliable earthing of