Samsung SHR-6164P LIVE SCREEN CONFIGURATION, English _25, Icons on the Live Screen, <ON, Name, LIVE , Description, Screen Mode, System Operation, specific time interval

LIVE SCREEN CONFIGURATION

Icons on the Live Screen

You can check the status or operation of the DVR with the icons on the live screen.

2009-01-01 00:00:01

LIVE 

CAM 01

Name	Description
Current Date, Time	Displays the current time and date.
Login Information	When you are logged in, the “LOG ON” icon will be displayed.
	Displayed if the zoom function is activated.
	Displayed if you press the Pause button.
Screen Mode	Displayed in Auto Sequence mode where all channels are switched at the
	specific time interval.
	Displayed if the recording is in process.

MTo cancel the recording, enter the password. Displayed if there is a problem with the cooling fan.

	Displayed if the HDD is full and the DVR has an insufficient space to record.
System Operation	Displayed if no HDD is installed or the existing HDD should be replaced.
	Displayed if the HDD needs a technical examination.
	Displayed if a new firmware is found from the network.
Video Input Status	Displayed if no input is entered in the condition that the camera is set to <ON>.
	Nothing will be displayed on the screen if the camera is set to <OFF>.
Camera Name/ Channel	Displays the camera name and the changed channel, if any.
	Displays the resolution of the recording screen. (Page 52)
	Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.
	Displays AUDIO ON/MUTE.
Camera Operation	Not displayed in video mode if deactivated.
	If the sensor is set to <ON>, the input signal will be displayed on the screen of
	the connected channel.
	Displayed if a motion detected in the condition that the motion detection is set to
	<ON>.
	Displays the current record mode from Record/Event/Schedule.

English _25