connecting with other device
CONNECTING THE RS-485 DEVICE
Connect the RS-485 device through the back port.
M For example, you can connect and control the PTZ
camera which supports the RS-485 communication.
• Transfer Type : You may select either Half Duplex or Full |
Duplex as the data transfer type. |
PTZ device | Rear |
Half Duplex Type
• Baud Rate : Supported Baud rates are 600/1200/2400/ |
4800/9600/19200/38400. |
Data
Data (+)
M | Check if the |
| product first. |
| Pay attention not to change the polarity |
|
|
Tx(+)
Full Duplex Type
Depending on camera’s type, connection polarity can be |
different. |
For further information, refer to the respective PTZ |
Camera’s documentation. |
Rx(+)
Ex : |
DVR(TX+/-) ↔ SCC-C6403,07(TX+/-)
Tx(+) | Rx(+) |
|