Samsung SHR-6164P 1) If adding HDDs to SHR-6080,6160&6163, 16_ installation, installation, Adding a HDD, sides and remove the upper and lower brackets

installation

Adding a HDD

M Make sure to unplug the power cord from the wall outlet before proceeding with the installation.

Number of HDDs to install : SHR-6082/6162/6164 : Default 1 HDD + Up to 4 HDDs added SHR-6080/6160/6163 : Default 1 HDD + Up to 5 HDDs added

By factory default, the unit is equipped with one HDD.

The following instructions are when you have installed the maximum number of HDDs on the master unit.

1.First, loosen the screws in the left and right sides and remove the cover.

Cover

1) If adding HDDs to SHR-6080, 6160&6163

M For SHR-6082/6162/6164 models, see the following page.

2.Loosen the screws (x4) in the left/right and upper

sides and remove the upper and lower brackets.

Upper Bracket

Lower

Bracket

3.Install HDDs (x3) on the lower bracket and fi x them with screws.

The screw (UNC 6-32) to use in the installation comes with the HDD.

Firmly secure the screw so that it can not get loose from such as vibration.

4.Install HDDs (x2) on the upper bracket and fi x them with screws.

	Upper Bracket
Add
	Add
	Lower Bracket
Add
Add	Installed by
Add
	default

16_ installation