EVENT MONITORING
This will display the channel in sync with a specifi c event (Sensor/Motion/Video Loss) if it occurs.
In “Monitor>Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 47)
•If multiple events occur simultaneously, the screen will switch to a split mode.
-2~4 events:
-5~9 events:
-10~16 events:
•If the second event occurs within the set time of <Event Display>, the fi rst event will last until the second one is terminated. (Page 47)
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
Event occurrence | 5 seconds | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Stop alarm | ||
CH1
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event occurred in CH 1.
Event occurrence | 4 seconds | 9 seconds | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stop alarm
CH1CH2
CH1
M Press the [ALARM] button to reset the alarm settings and to release the event mode.
If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will be performed.
This will also apply to the Spot Out monitor.
LIVE