installation
3.Install a HDD (x1) on the lower bracket and fi x it with screws.
4.Install HDDs (x3) on the upper bracket and fi x them with screws.
5.When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fi x them with the provided screws.
6.When the installation of additional HDDs is done,
connect the power cable and connect the HDD data cables (SATA Cable) to connectors ~ on the main board.
Note that the number of a HDD data calbe is nothing to do with operation of the HDD. Just make arrangements of the connectors considering the length of each connector.
|
| Upper Bracket |
Add |
| Add |
|
| |
Add |
| Lower Bracket |
| Add | Installed by default |
|
|
Upper Bracket
Lower
Bracket
7.Check if the connectors are properly connected and there is no problem with wiring, and close the cover
and fi x it with screws. | Cover |