3Com 3C16710 manual Displaying Information About the Hub

16710.bk : MANAGING.FRM Page 13 Tuesday, October 7, 1997 11:38 AM

Displaying Information About the Hub

Quick Config Manager enables you to display detailed information about the hub. This information is stored within the hub in a list, called a MIB (Management Information Base). The MIB defines what information can be obtained from the hub by an SNMP network management station.

To display this information:

1Do one of the following:

■Double-click on the graphical representation of the hub (but not on a port).

■From the Configure menu, select General Info...

2In the General Info dialog box, select the MIB II category.

Quick Config Manager displays the MIB II panel, as shown in Figure 4-5.

Displaying Information About the Hub 4-13

Figure 4-5 MIB II Panel