3Com 3CRWE825075A Checking The Leds, Mounting On A Wall, Using A Power-Over-Ethernet Lan Port

Models: 3CRWE875075A 3CRWE850075A 3CRWE825075A

1 62
Download 62 pages 25.68 Kb
Page 19
Image 19
USING A POWER-OVER-ETHERNET LAN PORT

4To link the access point to your Ethernet network, plug one end of another Ethernet cable into the port labeled To Hub/Switch on the power supply, and plug the other end into a LAN port (on a hub or in a wall).

USING A POWER-OVER-ETHERNET LAN PORT

If your LAN equipment complies with the IEEE 802.3af power-over-Ethernet standard, you can connect the access point directly to a LAN port. For example, the illustration above right shows a connection through a 3Com Ethernet Power Supply to a 3Com SuperStack® Switch.

CHECKING THE LEDS

When power is connected, the access point LEDs light. The illustration and the following table describe the LEDs and their functions.

CHECKING THE LEDSMOUNTING ON A WALL Reset Button

Name

Description

Radio

LED blinks red to indicate radio activity. Faster

 

blinking indicates more activity.

Power

LED lights green when operational code

 

is running.

Reset

Press this button and hold for 15 seconds to restore

Button

the factory defaults.

Ethernet

LED lights yellow when Ethernet link is

 

established. LED blinks to indicate activity on the

 

Ethernet. Faster blinking indicates more activity.

Radio

LED blinks red to indicate radio activity. Faster

 

blinking indicates more activity. (This LED is

 

only active when a second radio is installed.)

MOUNTING ON A WALL

CAUTION: The mounting plate is designed for wall mount installation only. To avoid equipment damage and possible injury, do not use the mounting plate for a ceiling installation.

The access point comes equipped with all the necessary hardware for mounting on a wall, including a mounting plate. For a secure installation, the mounting plate should be placed perpendicular to the floor, with the arrow pointed up, as indicated on the mounting plate, with the smooth side against the wall.

19

Page 19
Image 19
3Com 3CRWE825075A, 3CRWE850075A, 3CRWE875075A Checking The Leds, Mounting On A Wall, Using A Power-Over-Ethernet Lan Port