3Com 3CRWE875075A, 3CRWE850075A, 3CRWE825075A manual System Log, Status

Models: 3CRWE875075A 3CRWE850075A 3CRWE825075A

1 62
Download 62 pages 25.68 Kb
Page 38
Image 38

SYSTEM LOG

The System Log page allows you to set up a server to store event logs and to specify how the access point obtains the date and time. When you are finished configuring items on this page, click Apply.

Each logging message is tagged with a severity level, as defined in RFC3164. The severity levels are:

n

n

n

n

n

n

n

n

Emergency: system is unusable

Alert: action must be taken immediately

Critical: critical conditions

Error: error conditions

Warning: warning conditions

Notice: normal but significant condition

Informational: informational messages

Debug: debug-level messages

To set up a server for event logs: Select System Log Setup Enable, select a logging severity level from the pulldown list, enable the Logging Host and Logging Console, and enter the IP address of the server in the space provided.

To designate an SNTP server for obtaining the date and time: Select SNTP Server Enable and enter the IP addresses for primary and secondary SNTP servers in the spaces provided.

To use the access point as an SNTP server: Select SNTP Server Disable, specify time values in the spaces provided, select the time zone from the pull-down list. If you check the Enable Daylight Saving check box, the time will adjust automatically for standard and daylight saving time. When the SNTP Server setting is disabled, date and time settings revert to the defaults after an access point is reset, affecting the accuracy of log reports. To avoid this situation, enable the SNTP server setting and allow the access point to obtain the date and time from an SNTP server. (The event log page will display the default time after a reset until the access point receives the correct information from the SNTP server.)

STATUS

The Status pages display additional information about the access point status and station status.

nAP Status—Click AP Status to view the access point system configuration and access point wireless configuration.

38

Page 38
Image 38
3Com 3CRWE875075A, 3CRWE850075A, 3CRWE825075A manual System Log, Status