3Com 3CRWE875075A, 3CRWE850075A manual Regulatory Compliance Information, For Home Or Office Use

REGULATORY COMPLIANCE INFORMATION

3Com Wireless LAN Access Points 8250/8500/8750 (Models WL-450, WL462, WL-463) FCC Radio-Frequency Exposure Notice

This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled environment, this equipment has to be installed and operated while maintaining a minimum body to antenna distance of 1 meter.

This product does not contain any user serviceable components. Any unauthorized product changes or modifications will invalidate 3Com’s warranty and all applicable regulatory certifications and approvals. This product must be installed by a professional technician/installer.

FCC Part 15 Notice (Applicable to Use Within the USA)

802.11a radio only: This product is for indoor use only when using channels 36, 40, 44, or 48 (5150–5250 MHz).

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

nReorient or relocate the receiving antenna.

nIncrease the separation between the equipment and receiver.

nConnect the equipment into an outlet on a circuit different from the one which the receiver is connected to. n Consult the dealer or an experienced radio/TV technician for help.

The user may find the following booklet prepared by the Federal Communications Commission helpful: The Interference Handbook

This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock No. 004-000-00345-4.

Manufacturer’s Declaration of Conformity

3Com Corporation

350 Campus Drive Marlborough, MA 01752-3064 (508) 323-5000

Declares that the product:

Date: 28 February 2003

Brand Name: 3Com Corporation

Model Number: WL-450

Equipment Type: Wireless LAN Access Point

Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

3Com Corporation WL-450

Tested to Comply with FCC Standards

FOR HOME OR OFFICE USE