3Com 3CRWE825075A, 3CRWE850075A, 3CRWE875075A manual Basic Setup, 7Click Finish

BASIC SETUP

For a basic configuration, use the Setup Wizard as described below.

At any time, you can click Home to return to the Home page of the configuration interface. If you want to configure more advanced features, click Advanced Setup in the Home page.

1In the Home page, click Setup Wizard.

2In the “1-2-3” Setup Wizard page, click Next to start basic configuration.

3In the SSID page, enter the same Service Set ID as the other wireless devices in your network and click Next. (The SSID may be up to 32 alphanumeric characters and is case sensitive.)

4In the Channel page, select the channel options for the access point radios and click Next. The channel options are:

802.11g—You can select from these options:

n

n

802.11g Radio Channel—Set the operating radio channel number.

Auto Channel Select—When this mode is enabled, the access point selects a radio channel automatically.

802.11a—You can select from these options:

n

n

n

Turbo Mode—In some countries you can use Turbo Mode, allowing the access point to operate with a data rate of up to 108 Mbps. If Turbo Mode is not allowed in your country, this option is not available.

802.11a Radio Channel—Set the operating radio channel number.

Auto Channel Select—When this mode is enabled, the access point selects a radio channel automatically.

802.11b—Set the operating radio channel number.

5In the TCP/IP Settings page, you can choose whether the access point obtains its IP address from a DHCP server or uses a static IP address. Configure the DHCP Client settings and click Next.

6In the Security page, make selections and click Next.

For details on security settings, see “Security” on page 41.

7Click Finish.

8Click OK to restart the access point.

28