Upgrading from the Command Line Interface 89
Directory of unit1>flash:/
15367 KB total (10215 KB free)
2You can check the contents of the flash for the remaining units in the
fabric by entering:
dir unit2>flash:
dir unit3>flash:
dir unit4>flash:
dir unit5>flash:
dir unit6>flash:
dir unit7>flash:
The file list should contain one of each file type (.web, .def, .cfg
and .app).
3Any additional files should be considered for deletion to allow maximum
space for downloading the new files. To delete a file from the list enter:
delete/unreserved unit1>flash:/filename
To delete files from the list for the remaining units in a fabric, replace
unit1 with unit2 (on the next line) and so on for each switch in the
fabric.
4The /unreserved option will cause the file to be deleted from both the
flash and the recycle-bin. To check that deleted files have been removed
from the recycle-bin enter the following:
reset recycle-bin unit1>flash:/
If the recycle-bin is empty the following is displayed:
% File can’t be found “unitN>flash:/”
To check that deleted files have been removed from the recycle-bin for
the remaining units in a fabric, replace unit1 with unit2 and so on for
each switch in the fabric.
0 -rw- 714784 Apr 02 2005 01:36:16 s4h01_04.web
1-rw- 11043 Apr 02 2005 01:37:17 3ComOScfg.def
2-rw- 11427 Apr 02 2005 00:01:01 3ComOScfg.cfg
3-rw- 4529259 Apr 02 2005 01:39:57 s4b03_01_04s56.app
10014925-AD_S5500_GSG.book Page 89 Thursday, August 16, 2007 12:29 PM