3Com 9150, 9550 WDS Security Settings

38 System Configuration

WDS Security Settings

Figure 18 WDS Security Settings

Choose the required security level from:

■None

■WEP

■WPA-PSK (TKIP)

■WPA-PSK (AES)

If using WEP security, enter the WEP key. If using WPA, enter the

pass phrase.

Contents

Main Page 3Com Corporation 350 Campus Drive Marlborough, MA 01752-3064 Page I CONFIGURING THE WIRELESS ACCESS POINT Page Page T Page Page 1 Key Product Features Security Performance and Reliability Manageability Wireless Network Standards 802.11a 802.11b/g IEEE 802.3af Installing Your 3com Wireless Access Point 2 ACCESS POINT Networks without a DHCP Server Launch the 3Com Wireless Infrastructure Device Manager (Widman) utility Launching the 3Com Wireless Infrastructure Device Manager Page Page Page First Time Only System Status System Summary Page Page Page System Configuration Setup Wizard Page Page Page Page Page Page Page Page Page Page WPA Only WPA2-Only WPA2-Mixed Profile (SSID) Isolation WDS Link Settings Page WDS Security Settings Page Page 802.11d support Distance Antenna Type Aggregation Support Page Page IAPP 802.11F (IAPP) Support Page Ack-Policy When the Ack-Policy is checked. The device will not send ACK frames. The default value is disabled. The default value table: Page The following settings can be configured. Page Syslog Server Syslog Port Syslog Level Management Administration SNMP MAC Filtering Rogue AP Detection Page Firmware Auto Upgrade Page Page Page Connecting Through the Com Port Restoring Factory Settings A Diagnosing Problems Page Page Page Page B 3 COM P Page C Page D Antennas Used per Mode Page Page Page Page I