Diagnosing Problems | 63 |
A TROUBLESHOOTING
Diagnosing Problems
If you have difficulty with the Access point, try the following solutions.
Symptom
After you change the IP address, restore a backup configuration, or reset the Access Point to factory defaults, the Configuration Management System stops responding and you cannot continue configuring the Access point. If you change the IP address and click Apply, you cannot continue to configure the device using the old IP address. Similarly, after you restore a backup configuration or reset the Access Point to factory defaults, the IP address setting may be changed.
Solution
To recover from this situation and continue configuring the
Access Point:
1Close your browser.
