66Diagnosing Problems
should also obtain its IP settings from the DHCP server, make sure this is configured properly on the IP Network page and applied just before ending the session.
Symptom
Disconnecting the Access Point
Solution
To disconnect the Access Point:
CAUTION: Disconnecting the Access Point ends the network association. To avoid possible data loss, exit all networking applications on connected devices before you disconnect the Access Point.
1Unplug the Access point Ethernet cable from the hub or other device.
2Unplug the Access point power cord.
Symptom
Uninstalling Software and Documentation
Solution
If you want to uninstall the 3Com 11a/b/g/n Wireless Workgroup Access point software and documentation, you can either use the standard operating system procedure for removing programs or use the following shortcut:
