Edit | If you want to modify the content of a specific |
| rule, please check the ‘select’ box of the rule |
| you want to edit, then click ‘Edit’ button. Only |
| one rule should be selected a time! If you |
| didn’t select a rule before clicking ‘Edit’ |
| button, you’ll be prompted to add a new rule. |
Delete Selected | You can delete selected rules by clicking this |
| button. You can select one or more rules to |
| delete by check the ‘select’ the box of the |
| rule(s) you want to delete a time. If the QoS |
| table is empty, this button will be grayed out |
| and can not be clicked. |
Delete All | By clicking this button, you can delete all rules |
| currently listed in the QoS table. If the QoS |
| table is empty, this button will be grayed out |
| and can not be clicked. |
Move Up | Move selected item up. |
Move Down | Move selected item down. |
Reset | If you want to erase all values you just entered. |
| Click ‘Reset’ |
When you finished with the settings in this page, you can click ‘Apply’ button to save changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click ‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this requires about 30 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband router and continue on other settings later.
